x10 Europe - Home Automation

CONTROL YOUR GARDEN PORTAL AND GARAGE DOOR WITH A CLICK

As soon as they can afford it, people generally prefer to live in their own house, in a nice suburb. They have their own personal garage and garden next to their house. Coming back from work, each driver has to get out of the car in order to open manually the garden portal, the garage door, then get back in the car, drive it in, then close the garage door and the garden portal. What a complicated chain of events.

X10 has got the solution : the automated garage and portal door with remote control.

Now you can open your garage and portal on arrival and at departure with the 433 MHz remote control. You never have to get out of the car and save lots of time.

When leaving your garage, you will:

open and close your garage and garden portal
switch of the garage and/or house light.

When coming back home, you will:

open and close the garden portal and garage
switch on the garage and/or house lights

HOW TO REALISE THIS APPLICATION ?

X10 devices required :

MaxiController - SC9000 - 1 unit :
The SC9000 converts any home control signal received from the security remote into a 220V message through the mains in order to activate a light or a motorised door.
Universal Module - UM7206- 2 units :

This appliance will allow you to open or close your garage door and garden portal when it receives a message from the remote control.
Screw-in Lamp Module - LM15E - 2 units :

This module will switch on or off your garage or external lamp when it receives a message from the remote control.
Security Remote Control - HR11E- 1 unit :

The remote allows you to activate remotely any device connected to an X10 module such as lights, motorised doors, thanks to the 433 MHz technology.